, o ne, 20 stern ave. springfield, new jersey 07081 u.s.a. telephone: (973) 376-2922 stp36ne06 STP36NE06FP n - channel 60v - 0.032q - 36a - to-220/to-220fp stripfet? power mosfet type stp36ne06 STP36NE06FP vdss 60 v 60 v rds(on) < 0.040 2 < 0.040 n typical rds(on) = 0.032 q. exceptional dv/dt capability 100% avalanche tested low gate charge 100 c application oriented characterization id 36 a 20 a to-220 to-220fp internal schematic diagram applications . high current, high speed switching . solenoid and relay drivers . motor control, audio amplifiers . dc-dc & dc-ac converters absolute maximum ratings symbol vds vdgr vgs id id !dm(?) plot v,so dv/dt tstg t, parameter drain-source voltage (vgs = 0) drain- gate voltage (ros = 20 kfi) gate-source voltage drain current (continuous) at tc = 25 c drain current (continuous) at tc = 100 c drain current (pulsed) total dissipation at tc = 25 c derating factor insulation withstand voltage (dc) peak diode recovery voltage slope storage temperature max. operating junction temperature value stp36ne06 STP36NE06FP 60 60 20 36 24 144 100 0.66 ? 20 14 144 35 0.27 2000 7 -65 to 175 175 unit v v v a a a w w/c v v/ns c c ?) pulse width limited by safe operating area (1) iso 36 a,di/dt< 300a/|is, vdd< vibridse, t,< tjmax nj semi-conductors reserves the right to change test conditions, parameter limits and package dimensions without notice. information furnished by nj semi-conductors is believed to.be both accurate and reliable at the time of going to press. however. nj semi-conductors assumes no responsibility for any errors or omissions discovered in its use. nj semi-conductors encourages customers to verify that datasheets are current before placing orders. quality semi-conductors
STP36NE06FP thermal data rthj-case rthj-amb rthc-si nk ti thermal resistance junction-case max thermal resistance junction-ambient max thermal resistance case-sink typ maximum lead temperature for soldering purpose to-220 1,51 to-220fp 4.28 62.5 0.5 300 c/w c/w c/w c avalanche characteristics symbol iar eas parameter avalanche current, repetitive or not-repetitive (pulse width limited by tj max) single pulse avalanche energy (starting tj = 25 c, id = iar, vdd = 25v) max value 36 180 unit a mj electrical characteristics (tease = 25 c unless otherwise specified) off symbol v(br)dss loss less parameter drain-source breakdown voltage zero gate voltage drain current (vgs = 0) gate-body leakage current (vos = 0) test conditions id = 250 na vgs = 0 vds = max rating vds = max rating tc = 125 c vgs = 20 v min. 60 typ. max. 1 10 100 unit v ha ha na on(*) symbol vos(lh) rds(on) 'd(on) parameter gate threshold voltage static drain-source on resistance on state drain current test conditions vds = vgs id = 250 pa vgs = 10v id = 18 a vds > ld(on) x ros(on)max vgs = 10 v min. 2 36 typ. 3 0.032 max. 4 0.04 unit v to a dynamic symbol 9(3 (*) ci55 cqss crss parameter forward transcend uctance input capacitance output capacitance reverse transfer capacitance test conditions vds > ld(on) x rds(on)max id =18 a vos= 25v f = 1 mhz vgs= 0 min. 7 typ. 15 2115 260 65 max. 2800 350 90 unit s pf pf
STP36NE06FP electrical characteristics (continued) switching on symbol td(on) tr (di/dt)pn qg qgs qgd parameter turn-on time rise time turn-on current slope total gate charge gate-source charge test conditions vdd= 30 v id = 18 a rg=4.7ij vgs = 10v vdd = 48v id =36 a rg= 4.7 2 vgs =10 v vdd = 48 v id = 36 a vgs = 10 v gate-drain charge win. typ. 28 85 250 50 13 18 max. 40 115 70 unit ns ns a/(is nc nc nc switching off symbol tr(voff) tr tc parameter off-voltage rise time fall time cross-over time test conditions vdd = 48v id = 36 a rg=4.7i vgs = 10v min. typ. 12 25 40 max. 16 35 55 unit ns ns ns source drain diode symbol isd isdm(') vsd (?) trr qrr irrm parameter source-drain current source-drain current (pulsed) forward on voltage reverse recovery time reverse recovery charge reverse recovery current test conditions isd = 36 a vgs = 0 isd = 36 a di/dt = 100 a/^s vdd = 30v tj = 1 50 c (*) pulsed: pulse duration = 300 us, duty cycle 1.5 % min. typ. 75 245 6.5 max. 36 144 1.5 unit a a v ns uc a (?) pulse width limited by safe operating area safe operating area for to-220 safe operating area for to-220fp 10" 10'
|
